1. Drive the trailer to the desired unloading location.
2. Detach the trailer from the towball of the vehicle pulling the trailer and move the vehicle away from the trailer. (make sure to chock the wheels with if parked on a not level surface before you detach the trailer!)
3. Loosen end remove the ratchet straps securing the egg tot he trailer.
4. Unlock the safety pins inside the wheel arches. Are they stuck? Put some more tension on the steel cable using the winch.
5. Lower the trailer until the giant egg is standing on the ground with its 4 feet. Do this by using the winch and jockey wheel simultaneously.
6. Open the rear of the trailer by removing the locking pin. (this is only possible if the weight of the giant egg is no longer on the trailer)
7. Open the locking system by pulling the lever.
8. Pull the trailer away from underneath the giant egg.
9. Close the rear of the trailer.
10. Lift the trailer with the help of the winch and jockey wheel.
11. Lock both safety pins inside the wheel arches.
12. Store the ratchet straps on the trailer using the hooks and holes.
13. Attach the trailer to the vehicle and make sure the jockey wheel is all the way up.
14. You are ready to go again.

1. Park the trailer close to the giant egg.
2. Detach the trailer from the vehicle. (make sure to chock the wheels with if parked on a not level surface before you detach the trailer!)
3. Place the trailer in front of the giant egg.
4. Remove the ratchet straps.
5. Open the rear of the trailer.
6. Open the locking system by pulling the lever.
7. Unlock the safety pins inside the wheel arches. Are they stuck? Put some more tension on the steel cable using the winch.
8. Lower the trailer until you can push it under the giant egg. Do this by using the winch and jockey wheel simultaneously.
9. Push the trailer all the way under the giant egg. There is a bump stop you will hit.
10. Push the locking system at the back of the trailer. If this is not possible you need to push the trailer further underneath the giant egg.
11. Close the rear of the trailer and place the locking pin.
12. Raise the trailer and lift the giant egg with the help of the winch and jockey wheel.
13. Lock both safety pins inside the wheel arches.
14. Secure the giant egg using the ratchet straps. (ratchet straps are verry powerful, do not pull them to tight, just enough so that the egg is not wobbling)
15. Attach the trailer to the vehicle and make sure the jockey wheel is all the way up.
16. You are ready to go again.